- Epilog Laser - Mini 18 - 25 Watt C02 Laser - Low Low Hours in Athens, Georgia For Sale

This is a fully functioning, ready to go Epilog Mini 18 with air assist pump and dust/fume extractor. The machine is about 4 years old and has less than 200 hours of operation. Mainly used for light hobby. All functions well. The only parts that show any signs of wear are the cutting surfaces which are fully functional but do show signs of normal cutting, there are slight marks on the Stainless Steel insert for engraving from an errant Vector Cut, but no functional issues.
This unit has a 12 x 18" table, the front opens that will allow longer items such as guitars to be inserted. Easily cuts 1/4" wood and laser-compatible plastics. Engraves on tons of surfaces.
If you are tempted by an imported laser on eBay, check this out instead. I have owned both and the Epilog system will save you so much time and money that there is no comparison. The Epilog is truly plug and play, it works like a really fancy printer. The low dollar imported units will take you days or weeks to figure out how to setup and use. They also require incredible cooling contraptions to keep working, this laser is all in one package and can run all day long.
Included is the Dust Fume Extractor a high quality Delta Unit and the Thomas Pump air assist. These two accessories go for hundreds of dollars extra with the machine.
Here are specs from the Manufacturer:
Engraving Area
18" x 12"
(457 x 305 mm)
Maximum Material Thickness
4" (102 mm)
Maximum Material Thickness with Table Removed
6" (152 mm)
17.5" x 10" (444 x 254 mm) engraving area.
Laser Wattage
25 watts
Laser Source
State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory Buffer
Store unlimited files up to 64 MB. Rolling buffer allows files of any size to be engraved.
Permanent Job Save at the Laser Store up to 10 jobs at the laser, each up to 2 MB in size.
Air Assist
Attach an air compressor to our included Air Assist to remove heat and combustible gasses from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Red Dot Pointer
Since the laser beam is invisible, the Red Dot Pointer on Epilog's Laser Systems allows you to have a visual reference for locating where the laser will fire
Relocateable Home
When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Moveable Home Position feature on the Legend Elite Lasers.
Operating Modes
Optimized raster, vector or combined modes with engraving and cutting in one job.
Motion Control System
High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.
X-Axis Bearings
Ground and polished stainless steel NeverWear Bearing System.
Belts
Advanced B-style Kevlar Belts
Resolution
User-controlled from 75 to xxxx dpi
Speed and Power Control
Computer or manually-control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface
10 Base-T Ethernet or USB Connection.
Size (W x D x H)
27.8" x 26" x 13.5"
(706 x 660 x 343 mm)
Weight
70 lbs. (32 kg)
100 lbs. (45.5 kg) w/stand
Electrical Requirements
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Super-Silent? Cooling Fans Normal Sound Level
59 db
Ventilation System
External exhaust or internal filtration system is required. There is one output port, 4" in diameter.
Laser System Classification
Class 2 Laser Product - 1 mW CW Maximum 600-700 nm.